Home Capabilities Industries Served About Us Contact

Back
 Photo Gallery

Resin Transfer Molding (RTM) is commonly referred to as liquid molding.  With this process, a resin is mixed with a catalyst (hardener) and injected into a mold that contains dry fibers, such as fiberglass.  A static mixer regulates the ratio of polyester resin to catalyst.  Usually a ratio of 100:1 of resin to catalyst is used.  The mixture is then injected at a low pressure of approximately 5 psi into the mold.  The reaction time is usually minutes.

 

 

Top of Page
 

__________________________________________________________
Osborne Industries, Inc.  · 120 N. Industrial Ave. · Osborne, KS 67473 · USA
Toll Free: 800-255-0316 (U.S. & Canada) · Contact Us
Telephone: 785-346-2192 · Fax: 785-346-2194 · oemsales@osborneindustries.com
©2006 Osborne Industries, Inc. · Website policies & Terms · Site Map

This website is best viewed at 800x600
Last updated: 05/05/06