Reaction Injection Molding (RIM) Equipment

Reaction Injection Molding (RIM) Machines
Lance Injection Unit			Gusmer K-RIM 60
	Capacity	180 lb/min.		Capacity	60 lb/min.
	Components	2		Components	2
	Ratio	Variable		Ratio	1:1 w/variable adapter
	Mixheads	1		Mixheads	2 or 3 component

Gusmer Delta-RIM 80			Gusmer FF-1600 Foam Proportioner
	Capacity	80 lb/min.		Capacity	16 lb/min.
	Components	2		Components	2
	Ratio	Variable		Ratio	1:1
	Mixheads	2		Mixheads	2

Gusmer Delta-RIM 80			Accumetric Meter-Mix
	Capacity	80 lb/min.		Capacity	1.2 lb/min.
	Components	3		Components	2
	Ratio	Variable		Ratio	Fixed
	Mixheads	2		Mixheads	1 (Mechanical)

Admiral 2000 - 2 HP
	Capacity	300 lb/min.
	Components	2
	Ratio	Variable
	Mixheads	1

Reaction Injection Molding (RIM) Presses
Cincinnati Milacron 90T WL			Osborne-built press
	Capacity	90 ton		Capacity	45 ton
	Platen	48 x 108-in, tilting		Platen	48 x 79-in
	Open/shut height	72-in / 36-in		Open/shut height	84-in / 24-in
	Operation	Manual		Operation	Manual

Cincinnati Milacron 90T WL			Osborne-built press
	Capacity	90 ton		Capacity	150 ton
	Platen	48 x 108-in, tilting		Platen	60 x 108-in
	Open/shut height	72-in / 36-in		Open/shut height	56-in / 8-in
	Operation	PIC Automatic		Operation	Manual

Two (2) Cincinnati Milacron 75T WL			Osborne-built press
	Capacity	75 ton		Capacity	45 ton
	Platen	36 x 90-in, tilting		Platen	40 x 56-in
	Open/shut height	54-in / 33-in		Open/shut height	47-in / 8-in
	Operation	PLC Auto or Manual		Operation	Manual
	Frame Rotation Angle	0 to 90 degrees

Top of Page